Advantages
- Ready-to-use single component, requires only water addition
- High durability, enhanced with polymer modification
- Strong adhesion to multiple substrates
- Surpasses ANSI A118.4 shear bond strength standards
- Certified under EN/ISO with C2TES1 classification
- Meets and exceeds IS 15477:2019 – Type 3 TS1 Adhesive requirements
- Resistant to water penetration and impact
Usage
- Ceramic tiles (all varieties)
- Large format tiles
- Cement screeds & bedding layers
- Floors and walls (internal & external)
- Fountains & swimming pools
- Drywall systems (cement boards, bison panels, gypsum boards, fibre boards, etc.)
F. A. Q.
What is Durocon 530 Adhesive?
Durocon 530 C2TES1 is a high-polymer, cement-based thin-set adhesive that is mixed with water and used for tile or stone installation in both internal and external areas.
Where can I use this Adhesive?
You can use Durocon 530 in both internal and external areas, such as residential floors and walls, for installing ceramic, vitrified, and glass mosaic tiles.
Can I use this adhesive for metal tiles?
No.
For metal tiles, use only epoxy-based thin-set adhesives.
Seek guidance from the DUROCON team for proper adhesive selection.
What is the maximum tile size that can be installed using Durocon 530 ?
You can install tiles up to 1200 mm x 1200 mm.
For larger tiles, it is recommended to use Durocon 530.
My external wall design does not have spacing between tiles. Can I still use this Adhesive?
No.
Tile spacing is mandatory for external façades and floors.
Thermal movement is high, and spacers are required to prevent failures.
